Patch-ID# 102484-01
Keywords: PPP SLIP SERIAL MODEM COMMUNICATIONS REMOTE ACCESS 
Synopsis: PC-NFS 5.1a: Adds Point-to-Point Protocol to PC-NFS 5.1 and 5.1a 
Date: May/01/95

Solaris Release:

SunOS Release:

Unbundled Product: PC-NFS

Unbundled Release: 5.1a

Relevant Architectures: i386
NOTE:PC

BugId's fixed with this patch: 1168397

Changes incorporated in this version:

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch:

Patches required with this patch:

Obsoleted by:

Files included with this patch:

PPP.EXE

Problem Description:

PC-NFS 5.1 does not offer Point-to-Point Protocol.

Instructions for installation:


The accompanying executable file is a self-extracting compressed
file.  It contains all of the files necessary to add PPP to your
installation of PC-NFS 5.1.

Before you install PPP you must uncompress its components. Follow the
instructions below, then refer the to the README.PPP file for further
instructions.

Create a temporary directory.

e.g.        MD C:\PPP

Copy the PPP.EXE to an empty directory.

e.g.        COPY A:\PPP.EXE C:\PPP

Change to the newly created temporary directory.

e.g.        C:
            CD \PPP

Execute the PPP.EXE file to uncompress its contents.

e.g.        PPP

The contents of the PPP.EXE file will appear in the current
directory.

Delete the PPP.EXE to conserve disk space.

e.g.        DEL C:\PPP\PPP.EXE

Refer to the README.PPP file on the temporary directory you just
created for further instructions.


