This chapter provides an overview of the concepts and features of the
patch kits for the Tru64 UNIX operating system and TruCluster software products.
1.1 Overview
A patch is a collection of files that contain fixes to problems. When possible, patches are merged together, into one patch, if they have intersecting files or codependencies. A patch may correct more than one problem.
The Tru64 UNIX and TruCluster software patch kits contain patches for critical problems for those software products. These kits, which are distributed as needed, provide interim maintenance that prevents the occurrence of known critical problems. The patch kits contain the following elements:
Version-specific patches and patch-specific documentation
The
dupatch
patch-management utility, which
you use to install, view, remove, and manage patches
Patch kits are not intended to provide general maintenance and new functions; applying them to your system does not eliminate the need to upgrade to later versions of Tru64 UNIX and TruCluster software.
Patches are applicable to a specific version of the software products, unless stated otherwise in the Patch Summary and Release Notes. You cannot install version-specific kits on other software versions. HP recommends that you install all of the patches included in the kits and that you update the TruCluster software products (if applicable) at the same time you update your operating system.
To install Tru64 UNIX and TruCluster software patches, your system must meet the following requirements:
Be running the appropriate version of Tru64 UNIX and TruCluster software
Contain the necessary temporary and permanent storage space described in the Patch Summary and Release Notes document for the kit you are installing
After you install the patches, the following items are left on the system:
The
dupatch
utility
Patch-specific documentation that you can view with
dupatch
Optionally, the archived system files that were updated by the installed patches
HP distributes three kinds of patches for its Tru64 UNIX and TruCluster software products Release Patch Kits, Customer-Specific Patch Kits, and Early Release Patch Kits:
Release patches provide interim maintenance that prevents the occurrence of known critical problems. Release patches (sometimes referred to as official patches) are provided in kits grouped by software product versions. They are available from the Internet and on a CD-ROM you can order from HP.
Customer-Specific Patches (CSPs)
CSPs are provided in response to Tru64 UNIX and TruCluster software problems on specific hardware and software configurations. They are provided directly from your service provider.
ERPs provide one or more patches that will be incorporated into the next Release Patch Kit. They may be provided by your service provider or made available on the Internet. ERPs are a type of Customer-Specific Patch Kit. Most of the information about CSPs in this manual also pertains to ERPs.
1.3 Patch Kit Distribution and Naming
Tru64 UNIX patches for specific operating system and TruCluster software releases and Customer-Specific patches are packaged together in tar files. Each patch kit contains the following components:
Patch management utility (dupatch
) and
other patch management tools
Installs, removes, and manages patches for Tru64 UNIX and TruCluster software. This utility is installed and left on the system through the successful installation of a patch kit.
Patch subsets for the operating system and TruCluster software products
Documentation
Packaged with Release Patch Kits is
a document called
Patch Summary and Release Notes, which summarizes the problems that the patches
in that kit correct and provides any information you may need to know about
specific patches.
The information in this document also exists in separate
files that you can access using the
dupatch
utility.
(See
Section 2.4.)
Release Patch Kits also contain the Installation Instructions (the manual you are reading), which is common to all patch kits.
Both of these manuals are provided in PDF and HTML formats. The PDF version is easy to view and print using Adobe Acrobat Reader, which is provided on the Tru64 UNIX Documentation CD-ROM, and is also available at the Adobe Web site (http://www.adobe.com/). The HTML version is viewed with your Internet browser, such as Netscape.
Beginning with kits shipped after March 2001, the
dupatch
(8)man
command.
The contents of the tar file varies, depending on the type of kit. For example, a CSP kit might contain patches for several operating system versions, while Release Patch Kits always contain patches for only one operating system version. Also, the tar file may or may not contain TruCluster software patches. However, the structure of the tar file is the same for each type of kit.
The following sections describe Release and Customer-Specific Patch
Kits.
1.3.1 Release Patch Kits
Tru64 UNIX and TruCluster software Release Patch Kits are available from the Internet and on CD-ROM.
Patch Kits on the Internet
Patch kits are available publicly on the Internet through the HP Services Web page located at:
http://www.itrc.hp.com/service/patch/mainPage.do
Release patches distributed over the Internet are provided in a tar file that you must unpack on your system or on an NFS-mountable file system. The tar file for each operating system version will contain patch kits for that version of the operating system and patch kits for the applicable TruCluster software products.
The Tru64 UNIX Patch CD-ROM contains all of the latest patch kits for the supported versions of Tru64 UNIX and TruCluster software. The patch kits on the CD-ROM are provided in an expanded form (rather than a tar file) so they can be installed directly from the disk. The 00-READ-ME-FIRST file on the CD-ROM lists the contents of the disk and provides other information.
You can order a Patch CD-ROM in the United States by calling 1-800-344-4825; customers in other countries should contact your local HP sales office or authorized reseller for pricing and availability.
Release patch kit names have the following format:
Product
|
Version
|
BaseLevel
|
KitType
|
Kit#
-
MfgDate
For example, a file named
T64V51BB22AS0002-20030415.tar
contains aggregate Patch Kit 0002, built in base level 22 for Tru64 UNIX
Version 5.1B and TruCluster software Version 5.1B, manufactured on April 15, 2001.
The following list describes the format used in release patch kit names:
One of the following:
One of the following:
The support pool in which the kit was built. This formerly internal number has become a common way of identifying kits.
One of the following:
The numeric identifier that HP uses to track the kit contents.
The year, month, and day the kit was built in the form of YYYYMMDD.
1.3.2 Customer-Specific and Early Release Patch Kits
Customer-Specific Patch Kits provide interim patches for a specific customer's problem and computing environment.
Early Release Patch Kits, which provide one or more patches that will be incorporated into a future Release Patch Kit, are a type of Customer-Specific Patch Kit. Most of the information about CSPs in this manual also pertains to ERPs.
Although most CSPs are installed using the
dupatch
utility, some must be installed manually.
Patches that must be installed manually
are indicated with an M in their kit name.
In August 2003, a new naming format was introduced for CSP and ERP kits.
Kits manufactured since then use the naming format described in
Section 1.3.2.1.
Earlier kits, many of which are still available, used the legacy naming format
described in
Section 1.3.2.2.
1.3.2.1 Current Kit Naming Format
CSP and ERP kit names have the following format:
Product
|
KIT
|
UniqueID
-OSVersion
|
BaseLevel
-
KitType
-
MfgDate
For example, a file named
DUXKIT0013825-V40FB22-EMS-20030824.tar
contains an early release security kit built for Version 4.0F,
base level 22 on August 24th, 2003 with an indentification number of 0013825
and must be installed manually.
The following list describes the attributes currently used in these patch kit names:
One of the following:
The word KIT.
A unique ID for this kit, which is a seven digit number. For example, 0013825.
One of the following:
The Release patch base level the Customer-Specific patch is built against; for example, 22. This field is used by the service provider.
May contain one
or more of the following types.
If the
M
is not present,
the kit is installed using the
dupatch
utility.
The year, month, and day the kit was built, in the form of YYYYMMDD.
1.3.2.2 Legacy Kit Naming Format
Although the format for identifying CSPs and ERPs has changed, kits containing the legacy naming format are still available. The names for older kits have the following format:
Product
|
Version
|
BaseLevel
-
C
|
PatchID
-
UniqueID
-
OptionalField
-
MfgDate
For example, a file named
T64V50AB13-C9999900-1110746-M-20010531.tar
contains a Customer-Specific patch for Tru64 UNIX Version 5.0A,
built in base level 13, containing a patch identified as number 9999900 from
a unique kit numbered 1110746, which was built on May 31, 2001.
The following list describes the attributes currently used in patch kit names:
One of the following:
One of the following:
The Release patch base level the Customer-Specific patch is built against, for example, 22. This field is used by the service provider.
Indicates a Customer-Specific patch.
The numeric identifier used to track patches that are relative to the product version patch kit. Patch identifiers have the following format:
A unique kitting ID for the patch, for example, 1875.
Information about the type of patch and its installation method. This field can contain one or more of the following types in any combination:
The year, month, and day the kit was built, in the form of YYYYMMDD.
HP provides Web sites to help you
with the patching process.
The following sections provide pointers to general
information and additional documents you can use, including an overview of
the Web site for patch kit documentation.
1.4.1 Sites for Patching and General Information
To obtain a listing of the kit number, base level, and month of release for current and previous Release Patch Kits see the Patch Kit Roadmap:
To obtain the latest patch kit for your operating system and cluster go to:
To visit our main support page:
To visit the Tru64 UNIX homepage:
1.4.2 Related Documentation and Accessing It On Line
You can find the patch-specific documentation at the following Web site:
http://h30097.www3.hp.com/docs/patch/
You can find Tru64 UNIX and TruCluster software documentation at the following Web site:
http://h30097.www3.hp.com/docs/
The following documentation can help you work with patch kits:
Patch Summary and Release Notes
Included in each Release Patch Kit, this document lists the changes made by the patches and provides information you should know before and after installing specific patches. The Patch Summary and Release Notes for current and previously released Release Patch Kits are available on the Web.
Best Practice for Patching Tru64 UNIX
Describes issues to consider before beginning to install a Tru64 UNIX Release Patch Kit and steps to take to prepare a system for the installation process.
Technical Updates for Tru64 UNIX Versions 4.0F and 4.0G and for Version 5.0 and higher.
The technical updates contain information about restrictions and problems discovered in recent operating system and TruCluster Server release patch kits after their public release. It is recommended that you look at the patch technical updates for your operating system version before installing new patch kits.
The
dupatch
(8)
The Tru64 UNIX Installation Guide and System Administration manuals
TruCluster Cluster Installation and Cluster Administration manuals
Any release-specific documentation, specifically the Release Notes for the version you are patching