|
|
 |
TRU64 DUV40DWLSECO1 UNIX V4.0D Worldwide Language Subset ECO Summary
|
TITLE: TRU64 DUV40DWLSECO1 UNIX V4.0D Worldwide Language Subset ECO Summary
Copyright (c) Compaq Computer Corporation 1999, 2000. All rights reserved.
Modification Date: 04-Jan-2000
Modification Type: DOCUMENTATION: Updated Kit Dependencies
PRODUCT: DIGITAL UNIX V4.0D Worldwide Language Subset
OP/SYS: Compaq Tru64 UNIX [R] (formerly DIGITAL UNIX)
COMPONENT: Euro Currency Sign Support
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: DUV40DWLSECO1
ECO Kits Superseded by This ECO Kit: None
ECO Kit Approximate Size: 18800 Blocks (9625600 Bytes)
Kit Applies To: Tru64 UNIX V4.0D
System/Cluster Reboot Necessary: See INSTALLATION NOTES.
Kit Dependencies:
The following remedial kit(s) must be installed BEFORE
installation of this kit:
None
In order to receive all the corrections listed in this
kit, the following remedial kits should also be installed:
DIGITAL UNIX V4.0D Patches 762.00, 756.00,
and 729.00 in the DUV40DAS0005-19991007 patch
ECO KIT SUMMARY:
An ECO kit exists for Tru64 UNIX V4.0D Worldwide Language Subset on Tru64
UNIX V4.0D. This kit addresses the following problems:
Problems Addressed in DUV40DWLSECO1:
DIGITAL UNIX V4.0D does not support the display, processing and printing
of the new euro currency sign that was introduced on January 1, 1999 in
Software Division expects many of Compaq's DIGITAL UNIX customers to
remain on V4.0D through the year 2000 and they will require euro support.
This ECO kit, when installed together with DIGITAL UNIX V4.0D Patches
762.00, 756.00, and 729.00 in the DUV40DAS0005-19991007 patch kit will
enable the system to display, process and print the euro character by
using the new UTF-8 locales introduced in this ECO kit. Please note: the
above patch kit can be obtained at URL:
http://www.support.compaq.com/patches/
o #1 Provide European UTF-8 locales and new Unicode iconv converters
for supporting the euro currency symbol.
Updated/New Subset
------------------
IOSWWUCSBASE426 IOSJPUCSBASE426 IOSKOUCSBASE426
IOSZHUCSBASE426 IOSULUCSBASE426 IOSCAX11426
IOSDEX11426 IOSESX11426 IOSFRX11426
IOSITX11426 IOSSVX11426
o #2 Provide the UTF-8 X locales and CDE resource files
Updated/New Subset
------------------
IOSWWX11426 IOSCACDEDT426 IOSCSCDEDT426
IOSDECDEDT426 IOSESCDEDT426 IOSFRCDEDT426
IOSHUCDEDT426 IOSITCDEDT426 IOSIWCDEDT426
IOSJPCDEDT426 IOSKOCDEDT426 IOSPLCDEDT426
IOSSKCDEDT426 IOSSVCDEDT426 IOSTHCDEDT426
IOSZHCNCDEDT426 IOSZHTWCDEDT426
o #3 Provide ISO8859-15 (Latin-9) fonts that contain the euro characters
Updated/New Subset
------------------
IOSWWLAT9FONT100M425 IOSWWLAT9FONT75M425
o #4 Provide a new wwpsof print filter that support euro printing
Updated/New Subset
------------------
IOSWWPRINT426 IOSWWXFR426 IOSELOLFONT426
IOSIWOLFONT426 IOSKOOLFONT426 IOSTHOLFONT426
IOSTROLFONT426 IOSWWLAT2OLFONT426 IOSWWLATCOLFONT426
IOSZHSOLFONT426 IOSZHTOLFONT426
o #5 Provide a mechanism for displaying Unicode data in UTF-8 locale
Updated/New Subset
------------------
IOSWWFGC425
o #6 Provide a set of public domain Unicode fonts
Updated/New Subset
------------------
IOSWWFONTP425
INSTALLATION NOTES:
You install the ECO1 kit using the standard setld command. If you are not
familiar with installation procedures, please refer to the "DIGITAL UNIX
Installation Guide for Version 4.0D" for a description of installing the
DIGITAL UNIX kit and DIGITAL UNIX Worldwide Language Support software.
You can also refer to the setld(8) reference page for more information.
The installation takes approximately 10 minutes depending on the system
processor type and the number of subsets being installed.
This ECO1 kit includes 43 subsets. Four subsets are new and have no
counterparts in the original V4.0D kit. They are:
IOSWWFGC425
IOSWWFONTP425
IOSWWLAT9FONT100M425
IOSWWLAT9FONT75M425
This ECO1 kit includes updates to the following subsets:
IOSCACDEDT425 IOSCAX11425 IOSCSCDEDT425
IOSDECDEDT425 IOSDEX11425 IOSELOLFONT425
IOSESCDEDT425 IOSESX11425 IOSFRCDEDT425
IOSFRX11425 IOSHUCDEDT425 IOSITCDEDT425
IOSITX11425 IOSIWCDEDT425 IOSIWOLFONT425
IOSJPCDEDT425 IOSJPUCSBASE425 IOSKOCDEDT425
IOSKOOLFONT425 IOSKOUCSBASE425 IOSPLCDEDT425
IOSSKCDEDT425 IOSSVCDEDT425 IOSSVX11425
IOSTHCDEDT425 IOSTHOLFONT425 IOSTROLFONT425
IOSULUCSBASE425 IOSWWLAT2OLFONT425 IOSWWLATCOLFONT425
IOSWWPRINT425 IOSWWUCSBASE425 IOSWWX11425
IOSWWXFR425 IOSZHCNCDEDT425 IOSZHSOLFONT425
IOSZHTOLFONT425 IOSZHTWCDEDT425 IOSZHUCSBASE425
Compaq recommends that you install all the applicable subsets in this ECO
kit that correspond to the subsets currently installed on your system. To
install all of the ECO1 kit subsets, select all the subsets when prompted
for subset selection.
Installation Procedure
----------------------
1. Login as superuser and copy the ECO1 kit (e.g. eco1.tar) to a local
disk. For example: assume the ECO1 kit is copied to /var/tmp/eco,
extract the ECO1 kit from the tar file using the following commands.
# cd /var/tmp/eco
# tar xpvf eco1.tar
2. Shutdown the target machine to single user mode and issue the
bcheckrc command to mount local file systems:
# /sbin/bcheckrc
3. Change your working directory to the directory containing the ECO1 kit:
# cd /var/tmp/eco/kit
4. Use the setld command to install the ECO1 kit:
# /usr/sbin/setld -l .
5. Once installed, a list of subset options will be displayed. Select
the option(s) you want.
6. After the installation is complete, reboot the system:
# /usr/sbin/shutdown -r now
7. The ECO1 software checks to see if any of the previous ECOs in the
kit have already been applied. If some of the included ECOs have
been applied, they will not be shown in the menu for your choice.
All trademarks are the property of their respective owners.
|
Files on this server are as follows:
|
»duv40dwlseco1.README
»duv40dwlseco1.CHKSUM
»duv40dwlseco1.CVRLET_TXT
»duv40dwlseco1.tar
»duv40dwlseco1.CVRLET_TXT
|
