PROBLEM:  (QAR 50371)		 (Patch ID: OSF415-410047)
********
This patch fixes the ADVANCED option to the btextract utility to correctly 
restore /etc/fstab file entries.  Without this patch, the following two errors 
could occur:

   o Entries in the /etc/fstab file will sometimes be incorrect after the 
     btextract utility completes. 

For example in the following line, the entry for swap should actually be swap1:
 
      /dev/rz1b   swap   ufs sw 0 2

   o A restore operation deletes the entry for /dev/fd in the /etc/fstab file.

PROBLEM:  (QAR 50873)		 (Patch ID: OSF415-410047)
********
This patch fixes a problem encountered while using the btextract utility to 
restore file systems. The utility displays a system tape table and asks you 
which tape device you want to use to boot your system.  If you choose a tape 
device that does not contain a tape, the system displays the following error 
messages:

Positioning the Tape.

Error on device named /dev/nrmt0h - Place <device-name> tape drive unit <number> ONLINE

Error: Tape drive is not accessible

PROBLEM:  (51219)        	(Patch ID: 415-410056)
********
This patch fixes the Bootable Tape utilities. An automatic reboot problem
when the system is booted from tape using the custom_install.sh file in a
mini-root enviroment was corrected.

To recreate this problem, create a custom_install.sh file in /usr/lib/sabt/sbin
directory with the following commands:
-------------------------------------------------------------------------------
#!/sbin/sh
mount root_domain#root /mnt
#mount /dev/rz0a /mnt
/mnt/sbin/sysconfig -r bparm bootdef_dev="/dev/rrz1a"
/mnt/sbin/sysconfig -r bparm boot_dev="/dev/rrz1a"
/mnt/sbin/sysconfig -r bparm boot_osflags="A"
/mnt/sbin/reboot
------------------------------------------------------------------
where rz1 can be changed to the boot device where root resides. Where if root
device is rz0a and is ufs then uncomment the above line and comment the first
mount statement.

Create a bootable tape with selecting root filesystem to be backed up. After
booting from the tape, you will see that reboot hangs. You need to bring up
the system by hitting the power switch off/on.

After applying this patch, rewrite the custom_install.sh file as follows:
------------------------------------------------------------------
#!/sbin/sh
/sbin/sysconfig -r bparm bootdef_dev="/dev/rrz1a"
/sbin/sysconfig -r bparm boot_dev="/dev/rrz1a"
/sbin/sysconfig -r bparm boot_osflags="A"
/sbin/reboot
------------------------------------------------------------------

Create a bootable tape with selecting root filesystem to be backed up.
After booting from the tape, you will see that reboot does not hang.

PROBLEM:  (QAR's 48546, 48548, 48893, 50942, 50943, 50962, 51022, 51036,
********   51219) 	(Patch ID: OSF415-410097)

This patch will fix several Bootable Tape qars.

The problems are:
1) While restoring the filesystem from the tape, the
   filesystem size selected was not sufficient to restore the contents from
   the tape.
2) The information message for restoring AdvFS additional volumes was
   not informative.
3) The SWAP SELECTION code for attended restore was failing while
   restoring customized disks with not default disklabels.
4) Extra mkdir statement was printing on the terminal.
5) The error status from "mt" command was not being checked.
6) Relative path for -s filename was not being accepted by btcreate.
7) The estimated size of the root filesystem should be corrected.
8) The file systems are not mounted automatically by btcreate.
9) The reboot command does not reboot the system while booted from the
   tape.