PROBLEM:  (79675, 79343) (PATCH ID: OSF445-063)
********
This patch updates the emx Fiber Channel driver to revision 1.22,
correcting the following problem:

Command timeout problem seen in large configurations. Commands would not be
transmitted to the device correctly and would hang on the bus. Other commands
would finish successfully while these commands were hung. The adapter would
then timeout the command and abort it. This behavior was causing a decrease
in performance.

PROBLEM: (BCPM804R1) (PATCH ID: OSF445-111)
********
This patch fixes the following DE600/DE602 10/100 Ethernet adapters problems:
    - the primary CPU may appear hung on networks where switches send 
      "Flow Control Pause" frames if they become overloaded, and
    - transmit timeout messages appearing in the console log due to the 
      driver timing out a frame.


PROBLEM: (none) (PATCH ID: OSF445-113)
********
This patch provides the device driver support for 3DLabs Oxygen
VX1 graphics adapter.


PROBLEM: (none) (PATCH ID: OSF445-109)
********
This patch provides support for the DEGPA-TA (1000BaseT)
Gigabit Ethernet device.